Yeah, that. =)

You used Guarder slides, right? About that sight replacement, your mean use Marui style (like on 5.1), b'coz of same ports on slide for it? I just want to know i must use it b'coz of slide or b'coz of BBU?

What about useing M1911 slides on KJW Hi-Capa frame (or Marui Hi-Capa Frame)? BP Ten useing usual barrels and also useing barrel bushing + usual (Mil-spec) recoil spring IIRC.

No, it wasn't a Guarder slide.

The sight replacement, was simply because the KJW sights didn't fit a Hi-Capa 5.1 dovetail.

I don't see why that couldn't work. You'd just need to get all the parts to support such a conversion.

Can I fit this adapter http://www.airsoftatlanta.com/PDI-Th...A1-p/64014.htm to a Marui Detonics?
I want it for outdoor use to attach a fake silencer painted red

Yes, you can - with the use of a longer inner barrel.

Are Shooters Design Hi-Capa slides compatible with NOVA Barrel Bushings (slide have got special cuts inside!)?

I don't think so, IIRC SD have their own bushing for their slides that uses it...

I founded slide i need, but i hear SD can use only their own barrel bushing... hm... it's better to get slide first and test barrel bushing i already own (NOVA).

I think if its needed you can probably source the SD bushing from Dentrinity...

No, they are not.

The Shooters Design product came out before the existence of the Marui 1911 series. As such, they had to make up their own dimensions not only on how the barrel bushing fit to the slide, but they had also made up their own dimensions on the outer diameter of the straight outer barrel. Thus, none of it is really compatible.... although, the Shooters Design barrel is close enough to be used with standard Marui 1911 setups, albeit, with a slight wobble, as it has a smaller diameter.

Nova barrel bushings are based off the Marui spec, and will not fit a Shooters Design spec slide.

If you want to put a barrel bushing on a Shooters Design slide, you'll need to get a Shooters Design barrel bushing set. The other reason why this is, is because the recoil rod bushing for a 1911 is longer than the Hi-Capa. The Shooters Design rod bushing that comes in the bushing set is the proper length for such a setup.

Interesting on the Nova bushing to SD barrel, I haven't had much of a issue with that wobble. I think at one point I had to bore out one of the Nova bushing to fit my SD barrel. I am using SD barrel for all my Nova 1911 build...

http://www.pbase.com/racingmaniac/im...9/original.jpg

Hm... Set like this?
http://www.dentrinityshop.com/photo/COAS/gsms975s.jpg
GSMS975S

Oh... i think this will be better (Black Bushing, Silver Plug. Exactly what i need!):
http://www.dentrinityshop.com/photo/COAS/gsms975b.jpg
GSMS975B

Rod bushing? You mean "Recoil Spring Plug"? Yeah, i saw RacingManiac vids on YouTube about it.

O.K. setup now look's like this:
SD slide (BK);
SD Barrel Bushing (BK);
SD Recoil Spring Plug (SV);
SD Outer Barrel (Straight, SV);
SD Chamber (SV).

Should i get Recoil Spring Rod from SD too (to use with SD Plug)?

Also, it's just me or something wrong with rear slide serrations?
http://www.kic.com.tw/shop/images/pr...ges/5736_0.jpg
GSMS410B
Nothing wrong on another side:
http://www.kic.com.tw/shop/images/pr...ges/5736_1.jpg
GSMS410B

P.S. I am useing SD Outer Barrel (straight) with NOVA Barrel Bushing (Military) on HurricanE slide and it's working well. No wobbles between them.

I had my 5.1's slide break at the rear sight as described after around 3000 rounds. The gun still cycled, but the rear sight couldn't be mounted. I used it for several hundred rounds after the break, but its kinda hard to shoot at distance with just the front sight.

I've since ordered a slide from SD. The new slide weighs in at 92.2 grams which is about 3 times more than the stock slide at 31.5. I'm temped to slim down my BBU in an attempt to shed some grams there, and get the cyclic rate closer to the stock configuration.

Just received a shooter design grip, I tried to install it last night. The grip is very tight on parts, the trigger is sticking so as the grip safety, the leaf spring doesn't sit properly too. I assume I need to do some filing before it will work, right? Anybody with the same experience?

I had just bought one too. there needs to be filing for sure.
For me was the trigger,mag release and the the curve at the very top buy the grip screw that meets with the frame,but every grip is going to be different so keep that in mind. Its also time consuming so just buy a small file set and take you time. I spent a whole day just getting it perfect.

Spring plugs have a closed end (as on 1911's). If something runs through it, it supports it, and it acts as a shimming/fitment/friction device, then it is a bushing.

Any should work.

I would chalk it up to a lighting error.

Noted, as well as RacingManiac's comment. I may have got them mixed up with something else.

It would be less destructive to just use an enhanced recoil spring. It would also be way more effective.

These typically require some work. The mould they're using has degraded over the years. Many years ago, when they first came out, they fit perfectly right out of the box. Nowadays, the fit is tighter in some areas and it requires some additional fitment.