Airsoft Canada - Ares G36c lipo upgrade

Page 2 of 2

Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - Ares G36c lipo upgrade (https://airsoftcanada.com/showthread.php?t=134630)

ThunderCactus

January 12th, 2012 00:16

You MAY need a higher quality microswitch, but MOSFETs are primarily to get around the 400 year old throw switch triggers.

Easiest way to tell, if your switch burns out, it probably can't handle the wattage lol

HKGhost

January 12th, 2012 00:23

If you're not going with crazy fps or rof, the stock micro switch should be good enough. Or if you're concern, do what TC suggested and upgrade to a better quality switch.

SuperHog

January 15th, 2012 11:18

Quote:

Originally Posted by Fuzzy (Post 1587669)

My ares G36c with 11.1 lipo gets 18 rps. A little over 400fps and stock gearset.

Is a MOSFET needed with the microswitch? There are no mechanical contacts to burn and the microswitch seems to easily handle the voltage.

A microswitch will burn with a 11.1V Lipo. Microswitches are mechanical contacts, it's sealed up and you can't see it.

The MOSFET reduces the high current to it for longer life especially with a 11.1V

All times are GMT -4. The time now is 05:55.

Page 2 of 2

Show 100 post(s) from this thread on one page