ok, took it all apart, and back togeather, nothing....same thing happens, gears spin then cut out, >:(

did the gun shoot fine before taking it apart?
have you tried a different battery?

sounds like your battery is weak or a bad motor. or just try recharging your battery.

btw- opening the gun with the spring under tension will break your tappet-plate. you have been lucky so far

Guys, it was the motor, which is weird cause it worked before, but anyways, took my friends long type motor and it worked flawlessly! It was a high torque motor tho :p

ya its weird cause it worked before i took it apart, then i put diff motor in it and it worked fine, will the internals be able to handle a high torque motor?
just wonderin if the ICS Turbo 300 was, i need a new one now :p

turbo 3000 is considered a high torque motor. if i remember correctly i once had to buy a new turbo3000 because of the same problem you had.

So i could get any long type high torque motor, correct?

You are better find an other Turbo3000.

ICS had/has a tendency to use a different angle on the pinion and bevel, so using something else will work, but will wear the gears and pinion faster.

Damn, now i wish i was verified