Airsoft Canada
Page 4 of 5 123 4 5
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Canadian Airsoft News Stand (https://airsoftcanada.com/forumdisplay.php?f=188)
-   -   MadBull Ultimate Hopup released today (https://airsoftcanada.com/showthread.php?t=93088)

Huron January 9th, 2010 23:06
Quote:
Originally Posted by Swatt Five-Six (Post 1138599)
would love to know if anyone else has had this happen, was thinking of getting one for my M4, but if it makes a jump in fps like that, I would not be able to use my gun on most fields as it would be well over 400fps (already doing about 375). Plus, I was poking around for some reviews and came across a board in the US, the name of the board escapes me right now, but some was saying that they had to mod their bodies with some brands of AEGs to get it to fit, and even going as far as to say that Madbull was making a body that this hop up was ment for, that it wasn't ment for other aeg bodies.
It works in any TM style uppers as far as I know. I didn't have to modify anything to install mine in the G&G.

SINN January 9th, 2010 23:35
TM plastic bodies require a TM two piece hop up, or you have to modify them to accept a one piece.

shiftsup January 10th, 2010 00:30
Quote:
Originally Posted by shiftsup (Post 1137900)
Today I installed the Madbull Ultimate Hop Up into my completely stock CA XM 177 E2. Prior to installation this AEG's FPS was chronied at approximately 330 FPS. With the Ultimate Hop Up Unit installed the FPS was chronied at approximately 400 fps.

Has anyone else experienced this significant increase in muzzle velocity?

I am going to assume that my LNIB XM had an air seal issue that was causing the 330 fps that was corrected when this new hop up unit was installed. There's no way that two O rings alone are going to make a 20% increase in muzzle velocity.

Huron January 10th, 2010 01:18
Quote:
Originally Posted by SINN (Post 1138650)
TM plastic bodies require a TM two piece hop up, or you have to modify them to accept a one piece.
My mistake, I guess G&P is an acceptable standard instead?

techobo January 14th, 2010 10:38
I'm having a hard time picturing where the extra plugs and wires are supposed to fit. Also, I wonder if this will work if using a FET.

DarkAngel January 14th, 2010 11:01
Quote:
Originally Posted by techobo (Post 1141943)
I'm having a hard time picturing where the extra plugs and wires are supposed to fit. Also, I wonder if this will work if using a FET.
Through the mechbox perhaps? Those of us using a different gauges of wiring might have an issue with that however.

Mosfet shouldnt be affected by this at all. Theres no reason for it to be.

Crunchmeister January 14th, 2010 11:19
Quote:
Originally Posted by shiftsup (Post 1138677)
I am going to assume that my LNIB XM had an air seal issue that was causing the 330 fps that was corrected when this new hop up unit was installed. There's no way that two O rings alone are going to make a 20% increase in muzzle velocity.
Actually, 310-320 fps is the stock velocity for CA Armalites out of the box. Such a jump in velocity is quite perplexing.

That being said, I've had several guns where simply replacing the hopup sleeve with a Guarder Clear has jacked my velocity 15-30 fps.

techobo January 14th, 2010 13:22
Quote:
Originally Posted by DarkAngel (Post 1141948)
Through the mechbox perhaps? Those of us using a different gauges of wiring might have an issue with that however.

Mosfet shouldnt be affected by this at all. Theres no reason for it to be.
Ya, I guess so. It just seems like it'll be a really tight fit. For all the front wired guns especially. I guess it works if they made it already. I hope they release the tracer unit soon. I'd like to see it in action :)

DarkAngel January 14th, 2010 13:37
It is released. Redwolf has em for months already. I am however begging duy from airsoft parts to carry em.

shiftsup January 14th, 2010 13:40
Quote:
Originally Posted by DarkAngel (Post 1142021)
It is released. Redwolf has em for months already. I am however begging duy from airsoft parts to carry em.
I purchased mine off of Duy 2 weeks ago.

SINN January 14th, 2010 14:29
Quote:
Originally Posted by GabeGuitarded (Post 1138691)
My mistake, I guess G&P is an acceptable standard instead?
yeah for sure.

DarkAngel January 14th, 2010 14:34
The complete unit with the tracer? Thats what im talking about.
Everyone has the regular non Tracer unit. Only redwolf carries the Tracer unit version.

StrikeFreedom January 14th, 2010 14:45
While trapping the BBs is a good idea, a friend has this unit but has to flip the gun upside down to fire the remaining BBs at the end.

I don't mind dropping a few BBs, but very much prefer knowing when the magazine is out. Right now I have to shoot at the wall/ground or try to listen for dry firing. :(

cbcsteve January 14th, 2010 14:46
No need to beg anymore Duy IS getting them soon

I got the non tracer version, the air seal on this gun dramatically improved my shots.
Combine it with a Shredder Concave and a Guard Hop up you'll notice your groupings become tighter

Baows January 14th, 2010 14:56
I read the first 2 pages and it got to where people were talking about not having the o-ring on there? The chamber lock (bottom o-ring) is optional and does not actually have to be on there.

I picked one of these up from Capital Airsoft, and it's perfect.



~ Josh


All times are GMT -4. The time now is 07:39.
Page 4 of 5 123 4 5
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.