WE m4 Mags fill valve compatibility
 

Hi,

I try to find a retailer that sells some WE m4 Mags fill valve, but i dont find any.
is there other fill valves that are compatible with m4 WE mags ?
thanks

Mad Bull Steel Fill Valve - 3pc Set


http://www.airsoftparts.ca/store2/in...oducts_id=1032

Airsoftbuddy

http://www.airsoftbuddy.com/index_ep...roducts_id=227


Edit: work out to the same thing but shipping will probably be cheaper from Jugglez

hm, i have some here and the head of the valves are too big for the hole ...

Did you remove the plate before trying to insert the valve?

... lol, yeah... it just doeant fit all the way down. so even with the o-ring, I got alot of leaks.

Well then airsoftbuddy.com has the exact one that WE uses in their mags.

yep, thanks for the info.

Contact frank at velocity arms/ Toronto airsoft he may have some on the side

Would they be sold at a hardware store by any chance? I found that my valve was actually cracked along the base of the head and then it actually broke off and I had to disassemble the reservoir to get the rest of the valve out lol...

Don't replace the crappy WE fill valve with another WE fill valve...

Since the original batch had issues with the fill valve leaking (getting stuck open)...I've used some Madbull SS grenade fill valves. They don't quite fit (the head is larger than the opening of the fill valve whole)...but I've just screwed them in and they seem to hold gas ok (I've done 6-8).

On others...I've taken a MB SS grenade fill valve...put it in my lathe and turned down the head so it'd fit the hole...works like a charm. I would have done all my other ones except that they haven't leaked at all.

Airsoftparts.ca.

Do the Madbull valves work with WE HiCapa magazines?