Belt Fed Assault rifle pictures?
 

so I know I'm not the ONLY one. I've encounted a couple people mentioning them on this site and I've love some inspiration to complete mine

not talking just assault rifle based SAW's ... I'm talking been modified by factory or aftermarket to be belt fed.


so if you've got pictures of your AIRSOFT belt fed terror post em up! ... unfortunately I fear this will be a very small thread :(

Well, a few people have SHRIKE kits, beyond that I don't think there's much...

yeah ... changed the thread title for more of what I ment... AR as in assault rifle ... not so much AR as in armalite.

I know the HK11's and HK21's weren't exactly converted Assault rifles... but for the purpose of airsoft they are kinda just belt fed G3's .. LOL

I'm working on a M4 with 2 uppers, a carbine upper (baby dmr for airsoft) .. and a belt fed upper (sorta cross between shrike and the valkyrie) ..

basically swappable similar to real steal - pin out, slide off, slide on, pin in.

well I lost all my HK11E pics when my HDD died, but i still got the action shots of it :)
Never had time to fully complete the kit, but it was a heavy beast.
http://a4.sphotos.ak.fbcdn.net/photo...46928_3006.jpg
http://a5.sphotos.ak.fbcdn.net/photo...46926_2529.jpg

http://img.photobucket.com/albums/v2...e/58048a37.jpg
http://img.photobucket.com/albums/v2...e/58048a37.jpg

Aren't they both Mag fed?

this is where I'm at with mine ... starting to fab the rest of the peices of the upper to match the belt fed tray cover to the upper ... and some other more detail work ...

http://i56.photobucket.com/albums/g1...MDYxLmpwZw.jpg

the carbine's upper is in the picture too...

all the hacked up upper will be covered, and extend over the delta ring/barrel nut

I'm not following any set gun to follow, so there will be some creative license ... but it's already looking like an angry beast.. and so far it's all metal (alum)

does this count?
http://i43.photobucket.com/albums/e4...4/DSCN7782.jpg

I have a SHRIKE...which looks like a SHRIKE...that's been "well loved".

Not exactly hot-swappable uppers since the Hurricane bodies come apart differently than the likes of CA/G&P/KA/etc...

V2's suck...high speed/power V2's suck more...high speed/power V2's in a hurricane body suck most.

Wha..?!
You own something other than a grenade launcher?!
I. AM. SHOCKED! :D

p.s., nice Stoner - when are you modding it to accept an M203...? :rolleyes:

I have a 380fps 1500rpm V2 mechbox in my M249, and it's never failed me. Very long range, accurate, and it brings the rain. The only thing that ever goes down on the gun is the box mag lol

I'd say it has more to do with mechbox alignment and hopup chamber than the V2 mechbox

pictures!!!! :D

and yeah I sorta agree on the V2's ... but I'm not running a hot and/or fast setup ... 380-390 .. propably in the 1350rpm area (large 9.6 .. that;s what the giant PEQ is for LOL, gonna see about moving it to the box mag)

basically changing the whole attitude of the gun with the upper swap, via the fit of the upper, and the hop/barrel combo and BB choice..

the belt upper has some POS cheapo 1 peice metal hop up that wiggles and bounces .. a element 6.04 509 (just to reach the end.. and well I had one sitting around) .. half decent bucking .. stock style nubby.... running madbull precision .25's ... aiming for a 5ish ft pattern @ 180ft

the carbine upper .. I haven't decided on the hop chamber yet (madbull, prom, or that new modify) .. running a prom 6.03 363, guarder clear with the nub removed and shredder .. running Bastard .3's ... and everything I can do to keep the hop unit and barrel immobile ... aiming for ability to headshot @ 200ft (LOL) but will be satisfied with torso @ 180

I've built some really hot, and fairly high ROF guns... and never really saw an advantage other then the headache of getting everything to run smooth and reliably

http://www.youtube.com/watch?hl=en&v=NPenXn3WhbU&gl=US
take a look at this.....

nope no 203 or thumper on the stoner but it will receive a polar star HPA powered box when it become available

I've done plenty of those...the one(s) I was trying to get going were a bit more experimental. Resulted in many busted pistons, several blown gearsets and 3 toasted MOSFETs (fairly so...2 were old mosfets, another I had taken apart to fit the configuration). I was aiming for the 35rps @ 440-ish range :)

Sticking in a tamer V2 would be straightforward. And probably would have resulted in a lot fewer bench sessions taking it apart.

I've had/have plenty that shoot as hard or as soft as I want. I was just goofing around with builds for the SHRIKE....and that's a sure recipe for an empty wallet and blown mechs