Angry Gun vs. Madbull vs. Prometheus barrels?
 

I know I know.. Prometheus barrels are top notch but what I am looking for is more of a comparison of the Angry Gun vs Madbull as slightly cheaper options to the Prometheus barrels.
I can't seem to find much on the Angry Gun barrels but from the specs they seem like they would be a definite step up from a stock barrel.
Any advice, input on this would be appreciated.

Angry gun are okay barrels i have one in one of my guns theyare stainless and perform well.
Madbull are prolly a lil bettert but they are a coated barrel so they likely wouldnt last as long as the coating becomes damaged from bbs travelling down the barrel.
I have an angry gun (i think they are 6.03) 455 in one gun (ak i think)
A madbull 455 6.03 (my m4 i think could have it reversed)
And a madbull 455 6.01 in my bolt action
They all perform well i have given them all a coating of automotive wax and that is how i clean them (mothers california gold) makee em super slick and evens out any imperfections (not that there wher any visable) imo it should help keep them smoother and slicker longer by repelling water and not allowing crap to stick to them.
Considering price point is about the same id go with madbull keeping in minx they will need to be replaced when/if the coating becomes dented/damaged or scratched or what have you.

I should add that this barrel would be going in a BASR.
That being said, the Madbull wouldn't be taking a beating per say and might last awhile longer?
Torn..

two mad bull barrels is worth more than one prommy... just saying if you are planning on keeping the gun for a while invest in the better barrel. I run one in my masada and love it. Very strong barrel as well so no worry of it bending.

Hands down i do prefer the promy inner barrels,
I have the 603 455mm Angry gun in One of my Aks and a promy 455 in the other
both with Guarder clear hop up rubbers.

the AK with the Promy USE to have a 455 madbul v2 (black ones)

Hands down I find the angry gun above the madbull barrels.

I have also had experience with the madbull 601 363mm.
HATES the cold. night before the game 380 FPS
loaded my kit out in the morning,
all morning i used my VSR with a 554mm PDI 601.
Around noon went to use the AEG with the madbull ultimate 601,
the the speed was 180 fps - 220 fps and barely rolled out of the barrel.
ambient temp approx -7C

Checked again the next day and it was 380 again.

the Promy has never done that,
my angry gun 455 has never done that & Nor did my madbull 455mm

If you have the extra pennies - Promy
if you dont -- angry gun
if out of stock on promy and angry gun grab the Black madbull.

if the only barrel in stock are the madbull 601 -- Wait till the others are in stock :)

OK... let's compare the promy to the PDI barrels. Now which would you pick? The PDI doesn't have a 6.03 option from what I can see. Looks like its only 6.01 or 6.05.
I think at this point I am leaning towards the promy. Just need to find someone with a 509mm one in stock.

What sniper rifle are you putting it in?

Classic Army M24
Modify internals

PDI Titanium, its the best one available for a M24, I have it on my PDI M24

So long as it takes aeg cut barrels you can choose what you want.
PDI is prolly as good as promy.
PDI comes in 6.04 and 6.01
Promy are 6.03
In a bolt action u can use 6.01 without issue so long as u use good bbs and keep it clean
For the money id still suggest the madbull
If you wanna spend big money may as well go for a EdGi.
They are custom cut per order they offer (last time i talked to them 5.98 6.01 6.02 6.03 in any length up to 800mm
Youll have to facebook or email them with your request as they dont have a website anymore.
They are easy to find tho.
They ship from the philipines. Prolly round 100 bucks or so and beter then all the above

Emailed a couple retailers about promy barrels. I think my mind has been made up... of course assuming they get them in stock soon or can get them here quick enough.

is the classic army AEG cut barrels?

Yes it is.

Whats the difference between Angry Gun and Prometheus?

Both seem to be made of the same stainless steel material - both 6.03mm

Other than brand name and user hype why bother spending 70+ dollars on a Prometheus?

As always, with Airsoft, I'd say: Tolerances are tighter the more you pay; Quality control is better.

But that's more of a guess.