Airsoft Canada - 14mm die for suppresser

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - 14mm die for suppresser (https://airsoftcanada.com/showthread.php?t=176430)

Nateman332

February 22nd, 2016 15:04

14mm die for suppresser

Hey, I was wondering if anyone knows the die I should use to thread an outer barrel to fit a 14mm ccw suppresser? Of course I know I need a 14mm die but is it national course or fine exctra.

Sent from my SGH-I337M using Tapatalk

cetane

February 22nd, 2016 15:27

M14x1.0 is the size you need. It's not common in right hand (cw), even less common in left hand threads (ccw)

Kokanee

February 22nd, 2016 15:41

ebay is your friend; found one a year ago for a very reasonable price.

Tankdude

February 22nd, 2016 15:44

I have a set collecting dust.

You can buy them from www.e-taps.com

Price used to be ok, but the exchange is killer right now.

freshblake

February 22nd, 2016 15:44

Be sure to get the die starter too.

XZIVR

February 22nd, 2016 17:35

I have a lathe and can cut them as long as there's space on the barrel to chuck it in...

Red Dot

February 22nd, 2016 17:59

Worst case contact pestobanana on here, he had a set of die and taps from me.

eBay that from China is your best bet though.

Nateman332

February 23rd, 2016 17:02

Quote:

Originally Posted by XZIVR (Post 1972013)

I have a lathe and can cut them as long as there's space on the barrel to chuck it in...

It's on a revolver, so you can't Chuck it without it being out of balance.

Quote:

Originally Posted by Nateman332 (Post 1971999)

Sent from my SGH-I337M using Tapatalk

Nateman332

February 23rd, 2016 17:06

Quote:

Originally Posted by Red Dot (Post 1972014)

Worst case contact pestobanana on here, he had a set of die and taps from me.

eBay that from China is your best bet though.

Great, thanks. I tried aclands granger in town but 14mmX1.25 is the smallest they have. So eBay it is.

Sent from my SGH-I337M using Tapatalk

Nateman332

February 23rd, 2016 17:07

Quote:

Originally Posted by cetane (Post 1972002)

M14x1.0 is the size you need. It's not common in right hand (cw), even less common in left hand threads (ccw)

Thanks, just what I was looking for.

Sent from my SGH-I337M using Tapatalk

All times are GMT -4. The time now is 13:17.