Need help with krytac
 

So. I bought a krytac trident crb 64 days ago:mad: and yesterday it started behaving like it was dead with full battery's. When I put a new battery in it would give me 5-10 weak sounding shots and die. I tried it with multiple of my own battery's and one of the fields and nothing worked. My battery's worked in someone else's gun though. What could it be and what do I do?
I'm using 11.1 20c valken and asg triple cell

Thanks

Don't use valken products?

all jokes aside, you might have a loose connection that is expanding when it heats, as it heats its pulling apart and making less and less contact. Have fun with this witch hunt. Check the fuse to start with, although its highly unlikely as fuses are designed not to make any contact at all when they blow, (or they wouldnt do their job) but you might have a miracle.

This is just one possibility, you could have dead spots in your motor, although ussually when a motor dies it spins until it lands on a dead spot then doesnt move again, but you may have the same problem wires expanding when heated. you could also have such a high amp draw that your draining the battery below its threshold and your buddies gun has a low enough amp draw that the battery works, but highly unlikely has you have tried other batteries and stock guns should not be drawing that much power, that said check your motor height, if its off you might be overdrawing, does the battery get hot when you do your 5-10 weak shots?

My friends new krytac had the same issue the first time he used it. Turned out to be the motor connections. Hasn't skipped a beat since.

I had the same issue one day. I opened the pistol grip disconnected the motor from the red and black wire and inserted it. It worked fine since.

Fixed. Thanks everyone
 

It was the motor wires in the bottom of the pistol grip. Thanks for the help guys very appreciated.