G&G M16A3 sniper upgrade
 

I'm thinking getting a few upgrades for my gun but i need to know how if some of the parts will be compatible. Also, are G&G outer barrels + threaded or - threaded? one last thing, does the bipod attach to a rail system (if not what does it attach to)?


silencer
http://www.airsoftparts.ca/store2/in...oducts_id=1235

tightbore barrel
http://www.airsoftparts.ca/store2/in...roducts_id=461

rail system
http://www.airsoftparts.ca/store2/in...roducts_id=894

bipod
http://www.airsoftparts.ca/store2/in...roducts_id=381

hop up
http://www.airsoftparts.ca/store2/in...roducts_id=514

I will be getting more upgrades when i get more money (scope, complete systema gearbox, short mags, sorbo pad)

Thanks for the help :)

THAT bipod does not attach to rails. And I HIGHLY advise a hop up rubber upgrade, no point in everything else without at least getting a guarder clear rubber. And G&G outer barrels are ccw.

Thanks, what does the bipod attach to?

never seen one in person but I'm 99% sure it attaches to the front sling swivel screw on the foregrip of a sniper rifle (like a bolt action and the like)

you have an m16a3 , just put a tightbore and you get alot better accuracy for sure , whats the fps of that guin

well, i haven't actually chrono'd it, but i'm pretty sure it shoots at about 370fps

A safer bet may be the G&P hop-up unit.

While I haven't had experience with the KA hop-up unit, some of the other internals I've dealt with have left something to be desired (may just be my luck)

The G&P unit, however, I've had great success with. Seen Here

And +1 on Sepulcrum's comment about getting a gaurder clear.

Prothemus hop up is win, a little more expensive, but you will get great results

will the rail system i have chosen fit on the gun well?

Ask Jugglez (the guy who owns asparts) if the Mad Bull barrel nut is Imperial or Metric threading, and than make sure your G&G has the same type of threading.

ok, thanks