Quote:
Originally Posted by m102404
Sorry...I'm new to the WA system...
With either of your parts build...do you still need to start with a base gun (i.e. WA or AGM or etc...) and then add those parts?
I'm thinking about bits like the hopup unit itself or the outer barrel, etc...that you didn't list.
Thanks, great write up!!!
Tys
|
No all the parts there are all you needed.
Quote:
Originally Posted by RacingManiac
For hop-up you can get a complete G&P kit(inner barrel, hop rubber, hop chamber, and barrel extension) in something like part WP93a/b/c/d(a, b, c, d are different length inner barrel).
|
I myself will question that because I purchased a 370mm before and it didn't come with the rubber. Not sure if its an anomally.
Quote:
Originally Posted by RacingManiac
One thing that's also needed to be mentioned is the barrel nut. I think Prime/Ino uses real steel spec nut, threaded as such. So Airsoft RAS nut will not work. Some uses AEG nut and RS one will not work unless you have the receiver re-threaded.
|
G&P one which is what I recommand for front set, will work. Keep in mind, if it labels for Western Arms M4 chances are it will for, when it says Tokyo Marui M4 then chances are its for AEG.