|
I run 0 buffers - works just fine so far. On my KJW, I found that the addition of a buffer (stock, KJW provided one) + 160% recoil spring inhibited the slide lock function, as the slide could not physically cycle back (without me racking the slide hard to the back) far enough for the slide lock to engage. I just won't be using my stock TM slide in colder weather, that's all.
The Guarder springs tend to be ridiculously long... but I don't think that just a Guarder recoil spring and no buffer should inhibit the cycling of the slide/slide stop engaging.
As to the nozzle - replacing it with an aftermarket part shouldn't do anything but increase the time between installing replacement nozzles, correct? Might as just run the stock TM one for now and worry about getting that aftermarket one to fit later.
|