Airsoft Canada - View Single Post

Ninja_En_Short · November 17th, 2010, 16:16

Just one thing : if you want to test the air seal, just take the air compression system (nozzle, cylinder, cylinder head and piston all assembled), put pressure on the nozzle (don't make the cylinder head go back into cylinder) and push on the piston, there should be some compression but you should be able to push completely (don't force it though).

November 17th, 2010, 16:16	#10
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Just one thing : if you want to test the air seal, just take the air compression system (nozzle, cylinder, cylinder head and piston all assembled), put pressure on the nozzle (don't make the cylinder head go back into cylinder) and push on the piston, there should be some compression but you should be able to push completely (don't force it though). __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)