Airsoft Canada - View Single Post

shadow_matter · November 17th, 2010, 19:55

I'm in the middle of cleaning my GBB & mags for the Caps certification this friday. I took a magazine flow valve out and re-lubed the rings.

When I actuate the valve I can hear grit inside the valve that is causing the valve to creep closed rather than a quick smooth motion of open-close.

Normally valves can be broken down further by removing the butterfly clip on the rear valve button. Problem is with the KJW mag valves there is no exposed butterfly clip:

http://i153.photobucket.com/albums/s...9-46-08881.jpg

Anyone know how to take this valve down further from this point?? I've got to clear out the gunk.

Thanks,
Ryan

November 17th, 2010, 19:55	#1
shadow_matter Trader rating Join Date: Dec 2006 Location: Kitchener Ontario	KJW Flow Valve Disassembly: Help Please I'm in the middle of cleaning my GBB & mags for the Caps certification this friday. I took a magazine flow valve out and re-lubed the rings. When I actuate the valve I can hear grit inside the valve that is causing the valve to creep closed rather than a quick smooth motion of open-close. Normally valves can be broken down further by removing the butterfly clip on the rear valve button. Problem is with the KJW mag valves there is no exposed butterfly clip: http://i153.photobucket.com/albums/s...9-46-08881.jpg Anyone know how to take this valve down further from this point?? I've got to clear out the gunk. Thanks, Ryan __________________ Call sign: Shadow_Matter "I play airsoft, yes yes..."