Airsoft Canada - View Single Post

StrikeFreedom · November 17th, 2010, 21:23

I was taking apart a TM one, and it doesn't have a c-clip like the WE valve. Turns out that the "button" and the valve were press fitted. However if the center rod is bent by the slightest bit, then the seal is no good.

November 17th, 2010, 21:23	#4
StrikeFreedom Trader rating Join Date: Aug 2006 Location: Markham	I was taking apart a TM one, and it doesn't have a c-clip like the WE valve. Turns out that the "button" and the valve were press fitted. However if the center rod is bent by the slightest bit, then the seal is no good.