Airsoft Canada - View Single Post

Mjosr7 · July 25th, 2011, 15:57

Looks like the tolerance between the selector plate contact is really close to the contacts to the ASCU contact pins. I didn't want to bend the pins so I pushed the contact on the selector plate as far forward and than puta drop of C.A. Glue to keep it in place.

I also put a small bead of C.A.Glue on the right side edge of the selector plate contact.
Gonna see. Hot that works out.

Thanks for the input Audi_Bhoy..

July 25th, 2011, 15:57	#118
Mjosr7 Trader rating Join Date: Jul 2011 Location: New Jersey	KWA SR 7 selector plate tolerance Looks like the tolerance between the selector plate contact is really close to the contacts to the ASCU contact pins. I didn't want to bend the pins so I pushed the contact on the selector plate as far forward and than puta drop of C.A. Glue to keep it in place. I also put a small bead of C.A.Glue on the right side edge of the selector plate contact. Gonna see. Hot that works out. Thanks for the input Audi_Bhoy..