Quote:
Originally Posted by hymnforthewretched
The issue related to height of the RA Tech hammer may be a case by case issue. I have the RA Tech steel bolt as well as the complete drop in RA Tech trigger box and did not experience the same issue that turok did. I did not need to mod the bolt in my case and pulling the charging handle and cycling is just as good or maybe even slightly better than the stock WE set up. Maybe RA Tech changed something or I got lucky.
|
Im hoping that RA-Tech actually made the revisions so that we can all reap the effects of having a steel bolt with minimal modifications required! I bought several steel bolts from Jugglez recently (im a gun doc and do upgrades and services for WE M4) and the height of the notch that pulls the hammer is the same height as the first bolts I purchased directly from RA-Tech. However, I noticed that they have grinded more on the edge at the bottom of the newer bolts. This is pretty obvious as the grinded edge is silver in color, and not the steel color. Im guessing that RA-Tech just machined this section on existing bolts. I didn't see any benefits from this though..