|
CA33 Nozzle
Need some advice on this and can't find anything reliable in online searches.
I have a CA33 that needs a new nozzle. The nozzle in it is way too short and looks beaten to heck. It is 19.71MM long. I replaced it with an M4 grade o-ringed nozzle with a length of 21.20MM.
Upon testing the Hopup/Nozzle seal is still lousy. I can't believe it would be any longer and still allow bbs to feed. While I had the gb apart I put a sector chip on the sector gear to ensure proper feeding with this new, longer nozzle.
Is the G3 nozzle the proper nozzle for this Classic Army model (CA33)? I have found many answers online: 1) uses an MP5 nozzle, 2) uses a G3 nozzle and 3) uses an M4 nozzle. !!??!!?? Too many answers.
I have MP5 and M4 nozzles, but no G3/PSG1 nozzles. Could someone with a G3/PSG1 nozzle measure the length of the nozzle for me?
Thanks, venture
|