Airsoft Canada - View Single Post - KJW hi-capa 5.1 doesn't lock on empty mags

Rebel-Without-a-Cause · April 22nd, 2012, 05:22

Thank you Silverthorn for starting this thread and Coldsmoke308, Styrak and for everyone else for your input.

I was having the exact same problem as Silverthorn and it wore out my stock TM abs slide since the locking lever would only come up a little bit.

I had a broken Magpul AEG EMAG lying around so I took out the spring and cut it longer than my TM Mag Spring and it locked every-now-and-then.

Still unhappy with the results I figure out how the mechanism of the locking lever works so I took it a step further and cut a mm off the bottom part of the mag lip and it works like a charm now.

Thank you guys. :O)

April 22nd, 2012, 05:22	#15
Rebel-Without-a-Cause Trader rating Join Date: Feb 2012	Thank you Silverthorn for starting this thread and Coldsmoke308, Styrak and for everyone else for your input. I was having the exact same problem as Silverthorn and it wore out my stock TM abs slide since the locking lever would only come up a little bit. I had a broken Magpul AEG EMAG lying around so I took out the spring and cut it longer than my TM Mag Spring and it locked every-now-and-then. Still unhappy with the results I figure out how the mechanism of the locking lever works so I took it a step further and cut a mm off the bottom part of the mag lip and it works like a charm now. Thank you guys. :O) Last edited by Rebel-Without-a-Cause; April 24th, 2012 at 04:28..