Airsoft Canada - View Single Post

Dynamo · May 18th, 2012, 12:22

well i have been thinking of modeling that new Remington magnesium lower. it can take standard AR pistol grips, so it could use a normal V2 gearbox with that. the Ares ACR gearbox is identical externally to a V2 up to just above the bevel gear. everything past that is V3 specs.

Magnesium is fairly easy to cast too, so i might try to make a model of the lower out of wax, make a casting over it with plaster and melt/burn off the wax, then just melt some magnesium and fill it up.

May 18th, 2012, 12:22	#4
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	well i have been thinking of modeling that new Remington magnesium lower. it can take standard AR pistol grips, so it could use a normal V2 gearbox with that. the Ares ACR gearbox is identical externally to a V2 up to just above the bevel gear. everything past that is V3 specs. Magnesium is fairly easy to cast too, so i might try to make a model of the lower out of wax, make a casting over it with plaster and melt/burn off the wax, then just melt some magnesium and fill it up. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. Last edited by Dynamo; May 18th, 2012 at 13:10..