Airsoft Canada - View Single Post

HackD · August 17th, 2012, 00:31

I'm going to piggy-back on this review thread, and state my experience with Bent Barrel (so far).

Last weekend, i had an unfortunate incident with my ICS M4A1, which resulted in a broken upper receiver rail. I wrote about this in the Doctor's Corner, so i'll leave it at that. The part that i required, though an actual bolt-on to the upper receiver itself, could only be replaced as a complete
upper receiver at approximately $110.00. The separate receiver rail could not be bought by itself.

The owner of the store (Darklen on this forum) contacted me after reading my posts, and after rooting about his boneyard parts bin, and came up with the spare part in good nick. All told, he has saved me about $100.00 in doing that.

Thanks, Darklen and Bent Barrel Airsoft.

August 17th, 2012, 00:31	#2
HackD Trader rating Join Date: Jul 2011 Location: Somewhere between Hamilton Ontario, and Hell..	I'm going to piggy-back on this review thread, and state my experience with Bent Barrel (so far). Last weekend, i had an unfortunate incident with my ICS M4A1, which resulted in a broken upper receiver rail. I wrote about this in the Doctor's Corner, so i'll leave it at that. The part that i required, though an actual bolt-on to the upper receiver itself, could only be replaced as a complete upper receiver at approximately $110.00. The separate receiver rail could not be bought by itself. The owner of the store (Darklen on this forum) contacted me after reading my posts, and after rooting about his boneyard parts bin, and came up with the spare part in good nick. All told, he has saved me about $100.00 in doing that. Thanks, Darklen and Bent Barrel Airsoft.