Airsoft Canada - View Single Post - WE M4 AEG

Jugglez · December 15th, 2012, 13:43

Yes hammer out the triangle sight pins and slide it all out the front. Then you can take the delta ring off.

There are newer versions of the 2 rails you linked in the first post. (They are not actually being made anymore)
These are the newer releases:

http://www.airsoftparts.ca/store2/in...oducts_id=2454
http://www.airsoftparts.ca/store2/in...oducts_id=2142
Either will fit onto a WE, both come with a DD nut so you won't need your original delta ring anymore.

Also note you won't be able to use your gas tube with these rails. To prevent people from running these rails on real steel they have a solid block of material obstructing the rail's gas tube channel . You could drill the material out enough to pass the gas tube through , many have done it.

December 15th, 2012, 13:43	#9
Jugglez Trader rating Join Date: Feb 2005 Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401	Yes hammer out the triangle sight pins and slide it all out the front. Then you can take the delta ring off. There are newer versions of the 2 rails you linked in the first post. (They are not actually being made anymore) These are the newer releases: http://www.airsoftparts.ca/store2/in...oducts_id=2454 http://www.airsoftparts.ca/store2/in...oducts_id=2142 Either will fit onto a WE, both come with a DD nut so you won't need your original delta ring anymore. Also note you won't be able to use your gas tube with these rails. To prevent people from running these rails on real steel they have a solid block of material obstructing the rail's gas tube channel . You could drill the material out enough to pass the gas tube through , many have done it. __________________