Quote:
Originally Posted by Wepeel
I have a KJW KP-07 at the moment but I have a TM on order.
The slide stop seems to either have a lot of wear or to be poorly machined, the ramp very low and flush.
There's a rubber buffer on the spring guide but even with that off the slide wouldn't travel back far enough for the front part of the notch to interact with the slide stop.
|
Ah... I don't have that much experience with the KJW pistols to know how their slide stop is.
You shouldn't experience this problem at all with the TM.
You can always modify the slide stop to put in a steeper ramp.
Have you tried removing the rubber buffer from the recoil rod? That may help.