Airsoft Canada - View Single Post - FAQ for Tokyo Marui Hi-Capa, 2011, 1911, MEU & Detonics type variants

Wepeel · June 14th, 2013, 13:42

I installed a Nine Ball purple hop rubber and I ran into another issue.

Every time after the first shot, the hop will reset to 0. It doesn't matter what the wheel is set to, I look down the chamber after the first shot and no nub is protruding anymore.

I can still adjust the wheel and I can see the arm moving but it has no effect on the rubber. I have to disassemble and reassemble to get it working again only to have it disabled after the first shot again.

Any ideas?

EDIT: The stock rubber still works though.

June 14th, 2013, 13:42	#1757
Wepeel Trader rating Join Date: Apr 2013	I installed a Nine Ball purple hop rubber and I ran into another issue. Every time after the first shot, the hop will reset to 0. It doesn't matter what the wheel is set to, I look down the chamber after the first shot and no nub is protruding anymore. I can still adjust the wheel and I can see the arm moving but it has no effect on the rubber. I have to disassemble and reassemble to get it working again only to have it disabled after the first shot again. Any ideas? EDIT: The stock rubber still works though. Last edited by Wepeel; June 14th, 2013 at 13:45..