Airsoft Canada - View Single Post - Kings Arm M4A1 full metall

Stealth · November 15th, 2013, 14:45

I felt I should clear some things up

1) The receivers ARE made of pot metal, they do break.
2) Mechboxes have 7mm closed bearings - which do fail occasionally
3) The lower receiver does not accept industry-standard mechboxes (too narrow)
4) The delta ring comes off relatively easily with the proper tools (proper Picatinny vise and AR15 armorer's wrench)
5) It does not have an o-ring nozzle
6) The tappet plate should be bent to rectify the angle
7) Factory shim job is 9/10

November 15th, 2013, 14:45	#11
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	I felt I should clear some things up 1) The receivers ARE made of pot metal, they do break. 2) Mechboxes have 7mm closed bearings - which do fail occasionally 3) The lower receiver does not accept industry-standard mechboxes (too narrow) 4) The delta ring comes off relatively easily with the proper tools (proper Picatinny vise and AR15 armorer's wrench) 5) It does not have an o-ring nozzle 6) The tappet plate should be bent to rectify the angle 7) Factory shim job is 9/10 Last edited by Stealth; November 15th, 2013 at 14:50..