Quote:
Originally Posted by KenTsui
It's going to be hard to help you with this without actually having it in our hands. Perhaps a video of you attempting it may help?
|
Thank you very much. I very much apreciate your help. I have solved all my problems and have listed what I think was the cause of those problems.
I think the issue with the Mechbox not fitting in the lower was due to the Mechbox halves not being pressed securley together.
My original issue with the gun not firing I think was due to a very loose motor wire.
Quote:
Originally Posted by venture
Anybody ever have this problem with the KA M4's:
When I reassemble the gearboxes in them, a small percentage have the piston come out of its track upon closing. When you test the box, the symptoms are gears turn fine and nozzle moves fine, but piston does not engage. When I encounter one of these gearboxes I sometimes have to take apart and reassemble the box several times before the piston will stay where it belongs.
|
Yes! I had this issue when I was trying to get it all back together. Motor was spinning fine but not moving the piston back against the spring.
I opened the Mechbox again. Made sure everything looked ok. Reassembled and tried again and it worked.
very odd.