Airsoft Canada - View Single Post

N_Force · August 17th, 2014, 13:39

Sequential, the post you had 4 pieces of MP5K installed with H416c stock poison our mind deeply, I think those are RS. Since I did a bit of research, I believe there is a 80% chance to modify it for VFC k model.
First, the back plate cover is plastic. Same as the pdw stock kit. Second, the H416c stock is based on M4 platform design using tube screw in. Third, the pictures that sequential posted are looking very close to the vfc back plate and the vfc H416c stock design. I don't have a spare m4 stock tube but I'll measure the WE one see if the size is workable to mod into the back plate. That's why I had this conclusion for 80%. My internet is down these day and I have to use other one to upload pictures so I may try to do it later to show the back plate and 416c stock.

August 17th, 2014, 13:39	#284
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	Sequential, the post you had 4 pieces of MP5K installed with H416c stock poison our mind deeply, I think those are RS. Since I did a bit of research, I believe there is a 80% chance to modify it for VFC k model. First, the back plate cover is plastic. Same as the pdw stock kit. Second, the H416c stock is based on M4 platform design using tube screw in. Third, the pictures that sequential posted are looking very close to the vfc back plate and the vfc H416c stock design. I don't have a spare m4 stock tube but I'll measure the WE one see if the size is workable to mod into the back plate. That's why I had this conclusion for 80%. My internet is down these day and I have to use other one to upload pictures so I may try to do it later to show the back plate and 416c stock. __________________ aka Uncle Last edited by N_Force; August 17th, 2014 at 13:42..