Quote:
Originally Posted by Swaltz
I just placed in some steel parts into the trigger pack and suddenly the gun would shoot semi a few times then suddenly shoot non-stop on auto. I am not sure if it is caused by the 150% hammer spring and the cold weather causing the bolt to not push the hammer back enough for the sear to lock it... at first I thought it was the roller sear spring but after swapping it to a semi only spring and trigger, it still seems to do the same. Has anybody experienced this? It's about 8 Celsius now though...
|
I don't deal with real steel parts on the VFC, the trigger group works perfect if kept all original.
For the hammer spring issue I made my own custom buffer ring to increase the tension by only 15-20%. Which is perfect, not too strong and not too light. Still can use the original hammer without it being damaged to the point where it would snap.