Quote:
Originally Posted by turok_t
Whatever u do, don't mix ratech steel parts with the original WE/oem pot metal parts given the materials are different causing premature wear. If you using ratech hammer and sear, do not use the WE trigger since it's the front end of the trigger that actually engages the hammer. Feel free to refer back to my guide here:
http://airsoftcanada.com/showthread.php?t=132679 |
I tried that also using the Steel Trigger box - kept all the original RA-TECH Steel trigger parts intact (steel sear inside steel trigger), only replacing the steel hammer with the New CNC Steel Hammer. This resulted in semi auto firing once and then firing in burst AFTER I let go of the trigger. When I transferred the steel sear to the OEM trigger and trigger box along with the CNC Hammer, semi auto works just fine.
So I don't know if it's just the Steel trigger or the Steel box itself that doesn't work well with CNC Hammer. I'll try installing the steel sear to the steel trigger and put both inside the OEM box and see what happens.
Perhaps I might have to get the RA-TECH CNC Steel trigger as well?