|
it's possible you overdrew it when the gearbox was stuck. VFC motors aren't reputed to have a whole lot of torque but the stock spring also shoots about 400fps if you know what you're doing. If the sp110 is around 400 fps then there shouldn't really be much of a difference. Depends on the brand of spring. Both factory vfc and lonex 100s will net about 390fps with a prommy barrel.
Anecdotally I might have observed minor changes in amperage draw when changing from one spring to a stiffer spring, but that was on a neo magnet motor, even the shittiest of those will pull through what most springs have to offer. Stock ferrous motors, I never bothered to try to observe on the watt meter.
Those valken packs are probably only 10-15C with who knows what as a burst rating. They are barely powerful enough to do the job.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
Last edited by lurkingknight; October 2nd, 2016 at 03:03..
|