|
I used the locking pins from a KWA 18C. The KSC/KWA 18C uses two fake pins on both sides to replicate the look of the real Glock's pin. The KSC/KWA pins dont actually go thru the frame. I took the pins out of my old dead KWA 18C and drilled holes in my 19 and put them in.
For the logo I bought Proud enhanced pistol grips for the Marui 18C electric Glock and I cut the Glock logo out of the grip. I dremeled out the area on my 19 for the logo to sit in then I superglued the logo in place.
|