[ringsted]

hi guys

i have run around 30000 rounds through the gears as of the moment, the bevel shows some wear as does the last tooth on the sector gear which grips the metal gear on the pistion.

before i changed to the aluminum piston i change my piston on average every 800 rounds, and that pissed me off, so i tried different brands, marui, guarder, promentheus, systema, and they all break at these stress levels, but the aluminum piston just holds together, which is nice so far around 5-6 k rounds through it.

about the M4 the 9,6 4200 batteri is made buy taking 3 9,6 1400 batteries and then solding them in parallel, so instead if a 28,8 volts 1400 mah batteri i instead get a 9,6 4200 mah batteri, it fits nicely into the front grip and last very long around 12000 rounds on the gun.
actually it is a very good way to make use of the smaller batteries because it stresses them a lot less when the are 2 or 3 to give the current needed for the motor.

and yes all the vaules are in meter/second. just multiply by around 3,3 and you get the FPS values. and they are not BS either.

also please remember the energy therms about velociy and weight, Energy=(velocity^2)*weight so 150 m/s with a 0,43 is around 210 m/s with at 0,2

also remember that atm it is shooting 129 m/s with at 0,43, the 150-160 is what i would like it to shoot, hence why i am trying some custom springs. made of 2 and 2,2 mm piano wire.

about the pain, being shoot at around 25 meters with this rifle, it feels like a point blank shot by a 330 fps with at 0,2.