|
ok, I found the problem for real.
It's the fact that two of the 6 fake bullets/real chambers are not working properly:
these parts are supposed to be pushed in the cylinder at firing time, to ensure proper air-seal;The two faulty chambers are just a little harder to push in.
The cylinder system is not strong enough, and jams halfway.
Weirdly, the parts are exactly the same and don't seem to have any defect.
I'm gonna try sand-papering them just a tad, on the tip,to see if the 'push' gets easier.
or pre-compress the spring a little bit? I really don't know.
Hope this will eventually help some revolver-guy.
Jim
__________________
|