Quote:
Originally Posted by TokyoSeven
Maybe someone stole and pawned an M4 you never know. They may not have had any idea what they were getting rid of.
The M4 RIS comes with that ugly faux PEQ laser box that houses the battery.
Essentially thats required to house the battery unless you opt for using a custom lipo pack, however there are risks to using lipo batteries that I wont go ino here. Any ways since the gun is front wired you can, as someone suggested, pick up a regular M4 front end and then use that to house your battery in the foregrip. With that option though, you will loose the rails. You can always find a gun doc from your area and have the gun rewired to rear and opt to install a full stock or crane stock of some form. You could run the gun on a 9.6 but you will get a fairly high ROF which just lead towards wearing out the gun a litte bit quicker than normal. If the gun is truely stock Id advise to leave it that way. In the front end of the gun attached to the barrel you should find a fuse housing, that should protect your gun from a burn out atleast. Find yourself a nicer not as ugly PEQ online and continue to use the gun as is, its the cheapest method.
Shooting through the box and bother sides of a can seem to be on par for a stock gun. Did you attempt to shoot through the bottom of a coke can?
|
thanks for your input,i think i'll go ahead and replace the rails with a standard front end.
where could i buy that?
I see this model sells for $570 at 007 airsoft, considering this thing is fairly new and has a green laser,bipod and a knock off eotech I think I made a good investment.
This is my first airsoft by the way