Airsoft Canada - View Single Post

BlackRain · December 20th, 2008, 03:12

Okay here goes, TM M4A1 does not fire consistently, on semi it fires a few rounds then nothing... doesn't seem to cycle fully...then it fires fine, also sometimes just rolls BBs out of the barrel. Switch to FA and the same thing happens, it almost seems like there is not enough power. A few times it fired 3 BBs out at the same time. Battery was fully charged and is a 2300ma so there is plenty of power in it. Trigger also seems to bind every now and then as well... a new systema selector plate was also installed. Any direction or help on what I need to do to fix the issue would be greatly appreciated. I did read an article that said a new systema trigger low resistance high capacity assembly should be installed when a systema selector plate has been installed. Any truth to that?

December 20th, 2008, 03:12	#1
BlackRain Trader rating Join Date: Nov 2008	TM M4A1 firing problems Okay here goes, TM M4A1 does not fire consistently, on semi it fires a few rounds then nothing... doesn't seem to cycle fully...then it fires fine, also sometimes just rolls BBs out of the barrel. Switch to FA and the same thing happens, it almost seems like there is not enough power. A few times it fired 3 BBs out at the same time. Battery was fully charged and is a 2300ma so there is plenty of power in it. Trigger also seems to bind every now and then as well... a new systema selector plate was also installed. Any direction or help on what I need to do to fix the issue would be greatly appreciated. I did read an article that said a new systema trigger low resistance high capacity assembly should be installed when a systema selector plate has been installed. Any truth to that? __________________ Cheers, BlackRain. We are not the masks we wear, .... But when we don them we become them!