Airsoft Canada - View Single Post

TokyoSeven · February 12th, 2009, 05:45

Even though I have not seen both I would still like to contribute.
The mechbox that I recieved in the 416 was fairly decent, alot more than I expected.
The internals were fair but it still required a good clean down reshimming and regreasing, as well as replacement of its nylon bushings. For more info on the mechbox dig my old JG 416 review. Its been noted that even though all 416s have the same internals, newer JG models have been comming out with metal bushings and mechbox shell brands have been noted to vary from gun to gun.

February 12th, 2009, 05:45	#2
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Even though I have not seen both I would still like to contribute. The mechbox that I recieved in the 416 was fairly decent, alot more than I expected. The internals were fair but it still required a good clean down reshimming and regreasing, as well as replacement of its nylon bushings. For more info on the mechbox dig my old JG 416 review. Its been noted that even though all 416s have the same internals, newer JG models have been comming out with metal bushings and mechbox shell brands have been noted to vary from gun to gun. __________________ "Its only a little bit on fire"