Airsoft Canada - View Single Post

lemegacool · May 20th, 2009, 19:01

there is not enough room in the ras to put any battery... you must use the shitty grip-battery holder, i use either a 8.4v 1500 mini battery or this,... http://www.hobbycity.com/hobbycity/s...idProduct=7362

edit after mesuring mine with a caliper MAYBE the one you linked will fit but it will be tight as hell and a pin in the ass to install. and 11.1v wont shred your mechbox if she is well built... i runned a 11.1v lipo on kracken mechboxes without a problem

other option is a full stock (witch i'm thinking about because i'm tired of dissasembling the whole front end to remove the battery)

May 20th, 2009, 19:01	#9
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	there is not enough room in the ras to put any battery... you must use the shitty grip-battery holder, i use either a 8.4v 1500 mini battery or this,... http://www.hobbycity.com/hobbycity/s...idProduct=7362 edit after mesuring mine with a caliper MAYBE the one you linked will fit but it will be tight as hell and a pin in the ass to install. and 11.1v wont shred your mechbox if she is well built... i runned a 11.1v lipo on kracken mechboxes without a problem other option is a full stock (witch i'm thinking about because i'm tired of dissasembling the whole front end to remove the battery) __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry Last edited by lemegacool; May 20th, 2009 at 19:06..