|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 11th, 2011, 20:34
|
#1 |
|
aka Halo64
|
VFC AK74 wiring problems
Hey guys, for the last 3 days I've been rebuilding a VFC AK74, but I'm having a problem with the wiring. Right now I have a "realistic bolt" for it and would like to keep it like that, and not have to switch to the shitty little metal plate when I'm going to game this.
The problem I'm having is when I try to put the wires through the stock tang and into the full stock, the gun will fire a few shots and jam up. After that I have to release the A-R Latch, then it will not fire again. But the gun fire 100% fine when its wired to the top or the box out of the receiver. I've been trying a bunch of things and nothing seem to be working. Any help is appreciated. Thanks |
|
|
|
April 11th, 2011, 21:14
|
#2 |
|
It might be an extra connetor causing more resistance. What kind of battery are you using, all stats?
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
April 11th, 2011, 21:34
|
#3 |
|
aka Halo64
|
Well I've tried with and with out the extra connector, and got the same thing. I've tried every thing from 11.4v Lipo's to a 7.4v Ni-cad, same thing every time, but its weird that it only does it when its rear wired.
|
|
|
|
|
April 11th, 2011, 22:44
|
#4 |
|
|
The location of wiring won't change anything. You've either got a short or a bad connection.
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
April 11th, 2011, 23:34
|
#5 |
|
aka Halo64
|
Could be a short, but the wires seem fine. Oh well, I guess I'll replace them and see what happens.
Thanks |
|
|
|
|
April 11th, 2011, 23:44
|
#6 |
|
|
Or you could give it to a gundoctor who can take a better look at it.
__________________
Airsoft Sales and Repair/Upgrade Services |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
