Regarding LCT AK 74MN NV

[Oshiha]

Hi,
Recently I have been looking for some handguard for my LCT and I was wondering if this one would fit, I did some research but no luck. Please help!

CYMA AK Tactical Rail Handguard (Front Only) - BLACK
from http://torontoairsoft.3dcartstores.c...CK_p_1619.html

And I was also looking at the AK side mounts, anyone have a good suggestion??

Thanks for helping

[OM3GA]

From my knowledge LCT ak's have the same trunnion and ferrule (part the hand guards mount to) as VFC ak's and real steel. TM based guns are slightly different which is what Cyma is so I'm going to assume fitment would be an issue without modification.

The best bet would probably be to get both an LCT rail of your liking and also their side mount. Being LCT it's sure to work and the quality should be good.

[Forever_kaos]

Originally Posted by OM3GA

.... TM based guns are slightly different which is what Cyma is....

Nope, newer Cyma are VFC style with pins. Not the older TM style with screws.

As for that handguard though, it is for the older TM style. It would fit, but there would be lots of play in the lower handguard. Could be so much that it would be to the point of useless.
Not 100% certain on the upper.

I would search for a different style.

[COL.TIKER]

Originally Posted by Oshiha

Hi,
Recently I have been looking for some handguard for my LCT and I was wondering if this one would fit, I did some research but no luck. Please help!

CYMA AK Tactical Rail Handguard (Front Only) - BLACK
from http://torontoairsoft.3dcartstores.c...CK_p_1619.html

And I was also looking at the AK side mounts, anyone have a good suggestion??

Thanks for helping

Nope. You can see there is a nub on the back bottom side for sticking into the reciever. LCT AKs don't have slots for that nub. Its for TM AKs

Side mounts will also not fit on LCT AKs, side mounts are only for TM AKs. The LCT AK has a AK side mount, buy a real steel Russian optic for it.

[Kingsix]

Looks Oddly familiar...

http://torontoairsoft.3dcartstores.c...CK_p_1619.html

http://www.lctairsoft.com/pdc_parts/parts_pk151.htm

Although I can't judge the scale from photograph. So don't take my word for it.

http://torontoairsoft.3dcartstores.c...et_p_1436.html

This looks like it would fit a LCT/VFC style AK

You could get a quick detach side-mount, if you want optics mounted closer to the dust cover, if you have a NV model with the side optic rail.

http://airsoftdepot.ca/catalog/produ...products_id=31

[Spike]

I got one of those to fit my CYMA AIMS before, just took a little modification (which was easy, because the plastic used on that handguard is relatively soft)

[Oshiha]

Thank you for all the replies guys! Really appreciated.

Im iffy about the cyma hand guard for ak on toronoto airsoft and I'm looking forward to buy this lct hanguard straight from wgc as airsoftgears never replied to me.

This is what the side mount of my LCT looks like:


I would get the real steel side mount for my LCT, but if there is a cheaper option I would go for Kingsix's suggestion. I took a picture of the mount as you can see above, anyone know side mounts that actually fit?

[Magnaroth]

I also have an LCT AK74 MN. http://www.airsoftpark.com/tactical-...s-p-11080.html

This is what I am using. It was a little off at first, I needed to put it in my vice grip and hit it with a mallet in order to get it to line up properly. The mount fits 95% properly. So, good enough for me, and for the price, it wasn't bad.

[Off_kilter]

I think you should say screw it and sell the gun to me

[Magnaroth]

Got my hands on a Hephestus Rail. Vastly superior!