Magpul PMAG style 120 Round Mag for Systema?

Styrak · June 17th, 2008, 02:17

Aww...midcaps or lowcaps might garner a lot of sales. But hicaps? Probably not likely.

huang · June 17th, 2008, 02:24

Quote:

Originally Posted by Styrak

Aww...midcaps or lowcaps might garner a lot of sales. But hicaps? Probably not likely.

Buy the both regular low cap and PMAG high cap, switch the internal.

Systema version is in testing but will be more expensive than the AEG version.

Styrak · June 17th, 2008, 02:33

Quote:

Originally Posted by huang

Buy the both regular low cap and PMAG high cap, switch the internal.

Systema version is in testing but will be more expensive than the AEG version.

Heh, so regular like.....King Arms 68 round internals are compatible?

huang · June 17th, 2008, 02:37

Quote:

Originally Posted by Styrak

Heh, so regular like.....King Arms 68 round internals are compatible?

I would guess dboy 68 rounds is compatible because they all from the same factory.

TokyoSeven · June 17th, 2008, 03:42

I think I'll hold out for magpuls release of theirs.

The Acer · November 21st, 2008, 20:18

Is there any chance you would make a PTW high cap, im sure there would be enough interest being that you would be the only one. just a thought

Sorry about bumping this for after 5 months, didnt want to start a new thread

ILLusion · November 21st, 2008, 20:25

Any word on the PMAG for PTW?

mcguyver · November 21st, 2008, 20:29

I wouldn't want a hi-cap for a PTW. You are just asking for trouble.

There is not 1 hi-cap out there that feeds well, and consistantly all the time, every time. Even the stock PTW mags suffer from this problem occasionally, and it leads to chopped BBs, and you are forced to clean the gun.

And by consistant feeding, I mean the mag has to be able to feed the BB faster than the gun demands, and be able to do it with every BB. Dry firing is not a problem for the PTW, as you are not likely to damage anything in there. But if a BB is more than 50% (but less than 100%) fed when the piston slams the nozzle closed, the BB is chopped (or shattered), and those fragments can damage the hop-up (or enter the cylinder) if left unattended.

The best result for a PTW is always going to be a spring-driven mag follower feeding BBs smoothly, regardless of brand or capacity.

But I would appreciate a factory made-to-fit PMag, vs the $150 each custom made ones.

Krookedatmosphere · January 20th, 2009, 14:38

Quote:

Originally Posted by mcguyver

I wouldn't want a hi-cap for a PTW. You are just asking for trouble.

There is not 1 hi-cap out there that feeds well, and consistantly all the time, every time. Even the stock PTW mags suffer from this problem occasionally, and it leads to chopped BBs, and you are forced to clean the gun.

And by consistant feeding, I mean the mag has to be able to feed the BB faster than the gun demands, and be able to do it with every BB. Dry firing is not a problem for the PTW, as you are not likely to damage anything in there. But if a BB is more than 50% (but less than 100%) fed when the piston slams the nozzle closed, the BB is chopped (or shattered), and those fragments can damage the hop-up (or enter the cylinder) if left unattended.

The best result for a PTW is always going to be a spring-driven mag follower feeding BBs smoothly, regardless of brand or capacity.

But I would appreciate a factory made-to-fit PMag, vs the $150 each custom made ones.

I would agree.. Great idea that guy has but $150 per mag is not worth it but I would glad to buy some of these in mid caps 70rnd or 120rnd

Sir Locknload · April 4th, 2009, 21:19

put me down for 1 box of TAN please

mcguyver · April 4th, 2009, 21:43

Quote:

Originally Posted by Sir Locknload

put me down for 1 box of TAN please

Back of the line for you.

Welcome to the party, but I doubt these will be made anytime soon. I hope to be proven wrong on that.

Sir Locknload · April 5th, 2009, 03:08

LoL Mac! Is there a long list?? Know of anyother place thats selling these mags??

mcguyver · April 5th, 2009, 11:48

http://www.systema-ptw.com/Forum/for...ics.asp?FID=15

huang · April 6th, 2009, 13:26

Quote:

Originally Posted by mcguyver

Back of the line for you.

Welcome to the party, but I doubt these will be made anytime soon. I hope to be proven wrong on that.

"PMAG" of the PTW available already. It is for PTW and it looks like PMAG, not exactly as PMAG though. price is much affordable. I saw it this morning and I may post some detail tonight.

Sir Locknload · April 6th, 2009, 13:46

Quote:

Originally Posted by mcguyver

http://www.systema-ptw.com/Forum/for...ics.asp?FID=15

Thanks Mcguyver.....but not looking to spend over $80 a mag

the cheapest iv found was $45 post Mod... there has got to be a cheaper place....i guess ill have to keep checking Magpul so i can get them for $14-$18 and mod them myself!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 17th, 2008, 02:17	#61
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Aww...midcaps or lowcaps might garner a lot of sales. But hicaps? Probably not likely. __________________ Airsoft Sales and Repair/Upgrade Services

June 17th, 2008, 03:42	#65
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	I think I'll hold out for magpuls release of theirs. __________________ "Its only a little bit on fire"

November 21st, 2008, 20:25	#67
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Any word on the PMAG for PTW? __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

November 21st, 2008, 20:18	#66
The Acer Trader rating Join Date: Oct 2007 Location: Leduc AB	Is there any chance you would make a PTW high cap, im sure there would be enough interest being that you would be the only one. just a thought Sorry about bumping this for after 5 months, didnt want to start a new thread

November 21st, 2008, 20:29	#68
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	I wouldn't want a hi-cap for a PTW. You are just asking for trouble. There is not 1 hi-cap out there that feeds well, and consistantly all the time, every time. Even the stock PTW mags suffer from this problem occasionally, and it leads to chopped BBs, and you are forced to clean the gun. And by consistant feeding, I mean the mag has to be able to feed the BB faster than the gun demands, and be able to do it with every BB. Dry firing is not a problem for the PTW, as you are not likely to damage anything in there. But if a BB is more than 50% (but less than 100%) fed when the piston slams the nozzle closed, the BB is chopped (or shattered), and those fragments can damage the hop-up (or enter the cylinder) if left unattended. The best result for a PTW is always going to be a spring-driven mag follower feeding BBs smoothly, regardless of brand or capacity. But I would appreciate a factory made-to-fit PMag, vs the $150 each custom made ones. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

April 4th, 2009, 21:19	#70
Sir Locknload Trader rating Join Date: Apr 2009 Location: Maryland	PMmag put me down for 1 box of TAN please

April 5th, 2009, 03:08	#72
Sir Locknload Trader rating Join Date: Apr 2009 Location: Maryland	LoL Mac! Is there a long list?? Know of anyother place thats selling these mags??

April 5th, 2009, 11:48	#73
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	http://www.systema-ptw.com/Forum/for...ics.asp?FID=15 __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

Magpul PMAG style 120 Round Mag for Systema?

Accessories Discussion