Need your help about my M4

vincent wei · March 31st, 2009, 00:07

I got a ICS M4 and today I broken it.
there is a piece of plasic Arc aronud the Inner tube( PIC as follw) so how can I do with that? where I can buy it?
Thanks very very much!!!!

KND · March 31st, 2009, 00:09

that piece is call C-clip, it used to hold the inner barrel in place with the hop up unit.

I'm not sure if regular C-clip will fit in there since I haven't try on mine yet, you might be able to find replacement part or can buy a complete hop up assembly and save one for spare.

KND

vincent wei · March 31st, 2009, 00:13

.thanks alot!
....so bad..
usually how much forr the complete hop up assembly

KND · March 31st, 2009, 00:15

it's like 20 or 25 USD and plus like 7 $ shipped UPS ground.

KND

vincent wei · March 31st, 2009, 00:16

...I hope i can find the C-clip for ICS

KND · March 31st, 2009, 00:20

Quote:

Originally Posted by vincent wei

...I hope i can find the C-clip for ICS

I will check it out for you once I have time to make sure if the regular M4 C-clip will fit in there or other solution, you can just buy a used M4 hop up assembly unit and modify to fit ICS M4 body. it cost less and just need a little bit of work.

If you choose this way then I will guide you to do that. The only tool you need is rotary tool.

KND

vincent wei · March 31st, 2009, 00:38

that is very kind of you!!!
thank you very much!!

dpvu · March 31st, 2009, 00:42

Your gun will work without that part. Its there to stop the inner-barrel from sliding out of the hop-up, however, it's in there pretty tight and friction should be enough to keep it there. If you're worried, wrap a piece of electrical tape around the end of the hop-up where that clip would be.

vincent wei · March 31st, 2009, 01:10

but i still want that part

blackcaddi · June 26th, 2009, 20:41

I need help putting the hop up back together on my ics m4. I kinda figured it out but there is this very tiny black tube that fell out. Where does that go?

The Saint · June 26th, 2009, 20:47

http://img.photobucket.com/albums/v1...er-diagram.jpg

The red dot in that diagram is the black tube. Credit for the diagram goes to some guy from the internets.

blackcaddi · June 26th, 2009, 20:56

Quote:

Originally Posted by The Saint

http://img.photobucket.com/albums/v1...er-diagram.jpg

The red dot in that diagram is the black tube. Credit for the diagram goes to some guy from the internets.

So I guess I have to disassemble the whole hop up unit to insert this piece right.

baker_Jeff · June 26th, 2009, 21:33

I put one from a TM M4/hopup in my ICS.

blackcaddi · June 26th, 2009, 22:02

Does anyone know where I can find a video or schematics on how to disassemble and re-assemble the hop up system on my ics m4? So I can figure out where this tiny rubber tube goes. Does it go inside of the hop up system or can it be installed without disassembling the whole thing?

ThatIsWhat · June 27th, 2009, 16:46

It is the nub that the hopup arm pushes on to bulge the rubber through the hole on your inner barrel. If you turn your hopup upside down (with the inner barrel removed) you should see a little square hole where the arm pushes down. That little tube sits in there.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 31st, 2009, 00:09	#2
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	that piece is call C-clip, it used to hold the inner barrel in place with the hop up unit. I'm not sure if regular C-clip will fit in there since I haven't try on mine yet, you might be able to find replacement part or can buy a complete hop up assembly and save one for spare. KND __________________

March 31st, 2009, 00:15	#4
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	it's like 20 or 25 USD and plus like 7 $ shipped UPS ground. KND __________________

March 31st, 2009, 00:42	#8
dpvu Trader rating Join Date: Mar 2008 Location: Calgary	Your gun will work without that part. Its there to stop the inner-barrel from sliding out of the hop-up, however, it's in there pretty tight and friction should be enough to keep it there. If you're worried, wrap a piece of electrical tape around the end of the hop-up where that clip would be. __________________ JG HK416 KWA USP

March 31st, 2009, 00:13	#3
vincent wei Trader rating Join Date: Nov 2007 Location: Ottawa	.thanks alot! ....so bad.. usually how much forr the complete hop up assembly

March 31st, 2009, 00:16	#5
vincent wei Trader rating Join Date: Nov 2007 Location: Ottawa	...I hope i can find the C-clip for ICS

March 31st, 2009, 00:38	#7
vincent wei Trader rating Join Date: Nov 2007 Location: Ottawa	that is very kind of you!!! thank you very much!!

March 31st, 2009, 01:10	#9
vincent wei Trader rating Join Date: Nov 2007 Location: Ottawa	but i still want that part

June 26th, 2009, 20:41	#10
blackcaddi Trader rating Join Date: May 2009 Location: Mississauga	I need help putting the hop up back together on my ics m4. I kinda figured it out but there is this very tiny black tube that fell out. Where does that go? __________________ BLACKCADDI~TEAM SPARROW

June 26th, 2009, 20:47	#11
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	http://img.photobucket.com/albums/v1...er-diagram.jpg The red dot in that diagram is the black tube. Credit for the diagram goes to some guy from the internets. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

June 26th, 2009, 21:33	#13
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	I put one from a TM M4/hopup in my ICS. __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

June 26th, 2009, 22:02	#14
blackcaddi Trader rating Join Date: May 2009 Location: Mississauga	Does anyone know where I can find a video or schematics on how to disassemble and re-assemble the hop up system on my ics m4? So I can figure out where this tiny rubber tube goes. Does it go inside of the hop up system or can it be installed without disassembling the whole thing? __________________ BLACKCADDI~TEAM SPARROW

June 27th, 2009, 16:46	#15
ThatIsWhat Trader rating Join Date: Jul 2007 Location: Ottawa	It is the nub that the hopup arm pushes on to bulge the rubber through the hole on your inner barrel. If you turn your hopup upside down (with the inner barrel removed) you should see a little square hole where the arm pushes down. That little tube sits in there.

Need your help about my M4

Doctor's Corner