|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 8th, 2012, 23:36
|
#16 |
|
ok, took it all apart, and back togeather, nothing....same thing happens, gears spin then cut out, >
|
|
|
|
|
July 9th, 2012, 06:59
|
#17 |
|
did the gun shoot fine before taking it apart?
have you tried a different battery? sounds like your battery is weak or a bad motor. or just try recharging your battery. btw- opening the gun with the spring under tension will break your tappet-plate. you have been lucky so far Last edited by heikis; July 9th, 2012 at 07:05.. |
|
|
|
|
July 9th, 2012, 13:14
|
#18 |
|
Guys, it was the motor, which is weird cause it worked before, but anyways, took my friends long type motor and it worked flawlessly! It was a high torque motor tho
 ya its weird cause it worked before i took it apart, then i put diff motor in it and it worked fine, will the internals be able to handle a high torque motor? just wonderin if the ICS Turbo 300 was, i need a new one now
Last edited by GreenBastard745; July 9th, 2012 at 14:32.. |
|
|
|
|
|
July 9th, 2012, 16:19
|
#19 |
|
|
turbo 3000 is considered a high torque motor. if i remember correctly i once had to buy a new turbo3000 because of the same problem you had.
|
|
|
|
|
July 9th, 2012, 16:56
|
#20 |
|
So i could get any long type high torque motor, correct?
|
|
|
|
|
|
July 9th, 2012, 18:59
|
#21 | |
|
You are better find an other Turbo3000.
ICS had/has a tendency to use a different angle on the pinion and bevel, so using something else will work, but will wear the gears and pinion faster.
__________________
Quote:
|
|
|
|
|
|
July 9th, 2012, 19:04
|
#22 |
|
Damn, now i wish i was verified
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
