Machining metal frames/recievers

Dicey · January 28th, 2008, 19:51

Quote:

Originally Posted by Styrak

No offense but you still need to use capitalization and grammar, and not to mention a spell checker.

+1

Scarecrow · January 29th, 2008, 08:31

Machining a brick-like receiver or even a design that does not resemble a production firearm would get around the legality of it. The only problem with it is defending it when they challenge you on it - it will take money. This community isn't big enough to create a retailer who would be well heeled enough to take that battle on.

LAWDOG, get in here, is what I am saying correct?

Crunchmeister · January 29th, 2008, 08:59

Quote:

Originally Posted by digital_blue

Metal slides and barrels are supposedly still legal to import. Don't take my word for it though. I've had over $500 in metal slides and mags seized before. Unfortunately, there are no easy ways to reproduce GBB frames that could bypass the replica definition...

Yeah, I hear about slides being seized at times, yet others, that have been opened and inspected by customs, make it through. I just had a metal slide for my P226 make it through customs, even though it was with them for 3 days. I'll see later today when I pick it up if it was opened or not.

But yeah, manufacturing lower frames for pistols would definitely be a no-no.

AngelusNex · January 29th, 2008, 09:52

Well we shouldn't have to worry about all this since we still have Huang, sweet love-able import lower receiver-able Huang

Royal Paine · January 29th, 2008, 11:10

Rather than machining, there is a process called Selective Laser Sintering - basically, you send the company a 3D CAD file, or a stereo-lithograph file (STL) and they ship back your part made out of various materials - including a metal based material. We've used this company where I work - some of the materials, like the 'Duraform GF' is VERY tough - almost a fibreglass-like quality to it.

Still have to find someone to make the CAD file, but they're easier to come by - even a 3D modeler like for games, as long as they can output in the needed format could be used.

http://www.laetechnologies.com/selec..._sintering.htm

Prices seem to come in around $50 - $100 a part - so its not super cheap, but not horrible expensive either....

Karma · January 29th, 2008, 11:24

they might not touch a gun reciever though..., although for fiddly custom bits on AEGS.....hmmmmm

Royal Paine · January 29th, 2008, 11:37

If I had any money I'd try it though - 'part for bb/pellet gun' - top of my list would be a body for that kracken thing - never seen one, but right now its kinda the only thing in Canada that sounds even remotely close to useful in airsoft...

('a' body - something to work with/hold onto the rest of the parts - not necessarily something exactly like whats there...)

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 29th, 2008, 08:31	#32
Scarecrow A Total Bastard Trader rating Join Date: May 2003 Location: Tottenham	Machining a brick-like receiver or even a design that does not resemble a production firearm would get around the legality of it. The only problem with it is defending it when they challenge you on it - it will take money. This community isn't big enough to create a retailer who would be well heeled enough to take that battle on. LAWDOG, get in here, is what I am saying correct? __________________ LIKE us on Facebook!!

January 29th, 2008, 11:10	#35
Royal Paine Trader rating Join Date: Jan 2006 Location: Grey/Bruce, ON	Rather than machining, there is a process called Selective Laser Sintering - basically, you send the company a 3D CAD file, or a stereo-lithograph file (STL) and they ship back your part made out of various materials - including a metal based material. We've used this company where I work - some of the materials, like the 'Duraform GF' is VERY tough - almost a fibreglass-like quality to it. Still have to find someone to make the CAD file, but they're easier to come by - even a 3D modeler like for games, as long as they can output in the needed format could be used. http://www.laetechnologies.com/selec..._sintering.htm Prices seem to come in around $50 - $100 a part - so its not super cheap, but not horrible expensive either.... Last edited by Royal Paine; January 29th, 2008 at 11:17..

January 29th, 2008, 11:24	#36
Karma Trader rating Join Date: Oct 2003 Location: Barrie, Ontario	they might not touch a gun reciever though..., although for fiddly custom bits on AEGS.....hmmmmm __________________ Last edited by Karma; January 29th, 2008 at 11:29..

January 29th, 2008, 09:52	#34
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	Well we shouldn't have to worry about all this since we still have Huang, sweet love-able import lower receiver-able Huang

January 29th, 2008, 11:37	#37
Royal Paine Trader rating Join Date: Jan 2006 Location: Grey/Bruce, ON	If I had any money I'd try it though - 'part for bb/pellet gun' - top of my list would be a body for that kracken thing - never seen one, but right now its kinda the only thing in Canada that sounds even remotely close to useful in airsoft... ('a' body - something to work with/hold onto the rest of the parts - not necessarily something exactly like whats there...)

Machining metal frames/recievers

General